Oil filter supports and accessories for sandwich oil coolers

Adapter "Sandwich" for mounting the oil cooler and pipes with higher termostato.Raccordi not included.

Adapter "Sandwich" for mounting the oil cooler.

Tank which allows in case of mancaza oil pressure, the increase lubrication momentary, (outputs from curves with low draft oil by the pump) or in case of low engine oil pressure or turbo.

Very useful cap for magnetic oil sump

Sandwich support for installing external oil radiator in Ergal with holes for oil pressure sensors and temperature sensor suitable for installation on Fiat Alfa Lancia engines with JTD engines and many other engines.

Support that enables the installation of the oil cooler outside, with holes for pressioneolio and temperature sensors.

Sandwich support for external ergal oil radiator installation with holes for oil pressure and temperature sensors specific for all Suzuki 1300 and 1600 engines both 8 and 16v such as Swift, Vitara or other Suzuki engines.

Support for installing oil radiator Fiat 500 Abarth T-JET or 100 HP and all 1.200- 1.400 engines both 8 and 16v external with holes for oil pressure and temperature sensors specific for all engines with small oil filter Fiat Alfa Lancia Abarth, also all Multiair engines. Unfindable on the market.

Specific support for this car that lets you install the external oil cooler, with holes for oil pressure and temperature sensors.

Specific support for Toyota Land Cruiser LJ70 2400 TD and similar engines that allows you to install the external oil cooler, with holes for oil pressure and temperature sensors.

Specific support for this car that lets you install the external oil cooler, with holes for oil pressure and temperature sensors.

Support that allows you to replace the oil filter elsewhere.

Toyota Land Cruiser LZJ 24X1.5 oil cooler support specific for this car that allows you to install the external oil cooler, with holes for oil pressure and temperature sensors.

Kit to install the oil radiator on all T-JET ABARTH engines of the fiat, alfa, lancia group, both Multiair and NON multiair versions, both 8 and 16v. This kit is usually purchased by those who already have a new oil radiator or must be added by purchasing it in the oil radiators section. OIL COOLER and RADIATOR HOSES NOT INCLUDED.

Simply screw this support in place of the filter to take both the oil delivery and return with two pipe fittings and reposition the oil filter elsewhere when there is no room to install it.

Support to install external oil cooler in ergal with holes for oil pressure and oil temperature sensors.

Adapter sandwich support to install external oil cooler for Fiat Alfa Lancia engines with 1000-1100 Fire with holes for inserting oil pressure and oil temperature sensors. Fiat 1200 8v and 1200 26v have different type.

Specific oil cooler support unobtainable for this Nissan Patrol TR 3300 Turbo with 110 hp that allows you to install the external oil cooler, with 1"12 bolt pitch and oil filter, holes for oil pressure and temperature sensors.

Support for installing external ergal oil radiator with holes for oil pressure and temperature sensors or pressure tap directly in line from the oil pump

Support that allows you to space the filter and immediately have 3 holes ready to apply the oil pressure temperature sensors or delivery pipe for application of the oil delivery pipe for turbocharger or for aspirated engines.

Support that allows the installation of the external oil cooler, with holes for oil pressure and temperature sensors.

Adapter kit that allows you to move the Lancia Delta 2000 8-16v oil filter, to place the oil filter or to reposition the oil filter laterally when you don't have space to install it for various reasons, for example exhaust manifold of different type and size like the one made to heart which prevents assembly.

Specific support for Toyota land Cruiser KZJ70 125hp which allows to install the external oil cooler, with holes for oil pressure and temperature sensors.

Ergal external oil cooler installation support with holes for oil pressure and temperature sensors specific for all Alfaromeo Giulia GT 1300 and 1600 1978 1980s engines with cartridge filter

Cap to close the water passage on the black metal tube at the water pump outlet to eliminate the water-oil exchanger. P>

Specific plate support for Golf Polo 1400 TSI 185hp that allows you to install the external oil cooler.

1/8 NPT aluminum cap that allows to close the holes for oil pressure sensors, air, etc.

Adapter kit that allows you to move the oil filter, to reposition it elsewhere, when you don't have space or to install it elsewhere for various reasons.

Sandwich support for Mini Cooper R53 that allows you to install the external engine oil cooler.

Adapter kit that allows you to move the oil filter for Opel Astra 2000 and reposition it elsewhere when you don't have space.

Support for oil cooler installation that allows the installation of the oil filter but with connections for delivery and return pipes for external oil cooler for pre-angled radiator pipes for applications with limited space with holes for oil pressure and oil temperature sensors.

Supporto per installare radiatore olio esterno in ergal con fori per sensori di pressione olio e temperatura specifico per motori Camper Fiat Iveco 804004 Aspirato o Turbocompresso

Supporto specifico per questa vettura che permette di installare il radiatore olio esterno, con fori per sensori pressione olio e temperatura.

Sandwich support to install external ergal oil radiator with holes for oil pressure sensors and temperature sensor suitable for installation on Ford Escort Cosworth and Sierra Cosworth 2000 Turbo engines

Specific support for this car which allows you to install the external oil radiator, with holes for oil pressure and temperature sensors.

Specific oil radiator support that cannot be found for this Alfaromeo Alfasud 1300 car and all similar engines which in fact have the usual connection with a large filter which allows you to install the external oil radiator, with a drilled bolt for monobloc fixing and the original oil filter is screwed on, with holes for oil pressure and temperature sensors.