Increased pressure sensors for Fiat Alfa Romeo Lancia T-jet Abarth 1.400 engines that allow you to measure higher pressures up to 2.1 bar ideal for all vehicles that require an increase in power and have first series sensors that reach a maximum of 1.55 -1.6 bar. Complete set of two turbo pressure sensors
The pressure sensor installed on 06/01 fiat coupe 16v has the limit of arriving to measure the turbo pressure up to a maximum of 1.5 bar. Our fully plug and play sensor will be able to reach up to 2.2 bar
Pressure sensor up to 10 bar usable to measure the pressure of petrol, oil, air pressure and other linear outlet liquids. 12 volt power supply, 0-5 volt signal output
Adjustable pressure switch from 0.1 to 2 bar, with normally open contacts with rear adjustment screw. It can be used for example to activate a positive to pulse the additional injectors when a certain pressure is reached, or to activate something when a certain pressure is reached and deactivate it when it goes below. Useful for also driving additional injectors
Pressure sensor 05-01 installed on Lancia Delta 2.000 Ford Escort - Sierra Cosworth, allows to measure the turbo pressure up to a maximum of 2 bar and depression -1 bar, absolute pressure 3 bar. Usually this original sensor is gray while ours will be black.
The FERMO APS module allows you to deceive the original control unit by hiding the real maximum TURBO pressure or any pressure peaks, which form in the intake duct and which consequently generate the annoying power cut and consequent warning light with engine failure due to exceeded overpressure, so with this module it is possible to avoid this.
Linear pressure sensor up to 10 bar with 0-5 volt output that can be used to measure the pressure of gasoline, oil, air and other liquids. 5 volt power supply
This filter allows to filter the oil and petrol vapors together with all the dirt related to the evaporation of the engine oil to preserve the electric sensors such as the pressure sensors of our gauges.
Linear pressure sensor up to 6.6 bar with 0-5 volt output that can be used to measure the pressure of petrol, oil, air and other liquids. 5 volt power supply
Support that allows you to space the filter and immediately have 3 holes ready to apply the oil pressure temperature sensors or delivery pipe for application of the oil delivery pipe for turbocharger or for aspirated engines.
Increased pressure sensor up to 4 Bar absolute and can be used on any control unit that accepts a 0-5 volt input signal, especially on Turbodiesel engines but also on petrol turbos when you want to avoid the engine failure warning light and at the same time increase the turbo pressure .
Pressure sensor usable on almost all turbodiesels of the Alfa Fiat Lancia group and allows the engine light not to come on if remapped correctly and allows you to read turbo pressures up to 3 BAR and absolute pressures of 4 BAR
APS 02 -03 ProtoXide turbo pressure sensor that replaces the Marelli 02/03 pressure sensor installed on Lancia Delta 2000 Integrale and Evoluzione, Ford Cosworth 2000 and many other engines.
Pressure sensor up to 5.5 bar usable to measure the pressure of petrol, oil, air pressure and other liquids with linear output 0-5 volts. 5 volt power supply
Linear pressure sensor up to 10 bar with 0-5 volt output that can be used to measure the pressure of petrol, oil, air and other liquids. Power supply 5 volts
The 06/00 APS pressure sensor installed on Fiat Coupe 2000 Turbo 16v or catalysed Lancia Delta 2000 16v has the limit of being able to measure the turbo pressure up to a maximum of 1.5 bar and this sensor replicates the usual sensor with the usual maximum pressure and with our perfectly plug and play sensor.
Pressure sensor prt 06/01 PRT 06/00 Fiat Coupe 16v turbo - Lancia Delta 2000 16v Turbo Evo 2 catalytic APS 06/00, Lancia code 7750716 allows you to measure the turbo pressure up to a maximum of 1.5 bar 250 Kpa
ProtoXide pressure sensor that can be installed on Lancia Delta 2000 8-16v 4WD instead of the original Marelli 02/02 Aps sensor, Lancia code 77581420 allows you to measure the turbo pressure up to a maximum of
Increased pressure sensor up to 4 Bar absolute and can be used on any control unit that accepts a 0-5 volt input signal, especially on Turbodiesel engines but also on petrol turbos when you want to avoid the engine failure warning light and at the same time increase the turbo pressure . 3 WIRE connection
Adapter that allows you to easily connect a turbo pressure gauge so as to take both vacuum and pressure directly from the plastic manifold, avoiding drilling the intake manifold for all cars of the PSA group Peugeot 207 - 208 - 308 RCZ THP or Mini R56 R60 with 1600 Turbo engine.
Linear pressure sensor up to 20 bar with 0-5 volt output can be used to measure the pressure of petrol, oil, air and other liquids. 5 volt power supply
Online only
This website uses cookies to ensure you get the best experience on our websiteAbout cookies