This complete kit allows to by-pass the management of the valves on the original exhaust by activating and deactivating it at will using the engine depression that must already be present on the car.

With this module improperly called digital relay, you can simply activate, keep activated or pulse a load up to 100 amps with a pulse from 3 to 28 volts.

Turn anything on or off with the push of a button from your remote.

12 volt timed relay can activate or deactivate any electronic component with a timer that can be set from 0.5 seconds up to 60 hours!

Circuit built and programmed according to your needs up to 2 relays.

Pull switch, very convenient to turn anything on or off.

With this relay you can simply by using a very fast pulse with negative or positive command, activate and hold a load up to 20amp and then always turn it off with the usual pulse of a few milliseconds, and so on. 814

With this relay you can manage stable controls and avoid return currents from magnets or electric motors so as not to spoil the control driver itself or the control unit.

With this relay you can activate and keep activated a load up to 30amp and then turn it off by removing the impulse to drive any accessory up to 30 amps

With this relay you can invert the 12 volt commands so as to obtain opposite results to the command such as on the exhaust valves

Spare control unit with double remote control already programmed for use on exhaust valves.

24v relay which, through a very fast impulse with negative or positive command, can activate and keep activated a load of up to 20 amps and then always turn it off with the usual impulse of a few milliseconds, and so on. To be used in direct current DC.