Battery cut-off switch with deactivatable key

With newly built 12 volt relays you can simply use a very fast impulse with a negative or positive command to activate and keep a load of up to 20amp activated and then always turn it off with the usual impulse of a few milliseconds, and so on. To be used in direct current DC. It is found in multiple uses from control units for competition on cars or on industrial vehicles such as...

Adjustable timer from 1 second up to 16 minutes which allows you to activate or deactivate, for example, a fan, a solenoid or to switch off the engine after a pre-set time by pressing a button.

Pull switch, very convenient to activate something.

Tubo in silicone blu intenso, utilissimo per collegare Pop Off, Wastegate e attuatori in genere o passaggi di liquidi come acqua, non adatto per olio.

Waterproof protection suitable for scooters, motorcycles, boats.

With this you can simply relay via a pulse with control switch and hold a load up 100amp activated and then always turn it off with the usual impulse.

This control unit allows to set a threshold from 0-5 volts that when exceeding a selected voltage activates a relay such as the prot oxide relay or any other activation

4-position rotary switch with arrow illumination indicating the chosen contact. For multi-contacts or mapping change

Ignition switch with double key

adjustable pressure up to 3.4 bar, normally open with counted.

Activate or deactivate with the simple press of a button from your remote control the direct opening or closing of the throttle on the exhaust of the MERCEDES A45 AMG.