Questo kit permette di decidere autonomamente l'attivazione di una valvola pneumatica (acquistata separatamente) in modo elettronico con interruttore

Valves to be welded on the Porsche Macan exhaust when replacing the original exhaust and creating a sports one and wanting to maintain the original electronic management of the car which allows you to open and close the muffler exhaust, reassembling the original electric motor and keeping the series of the car so as to maintain the usual original management of the car, sport button,...

Kit for opening the electronic muffler exhaust complete with control unit and remote control and uses the valve already present on the car (not included in this kit) which allows you to open and close the exhaust of the muffler already present on your exhaust, complete with control unit and remote control and everything you need. It is only necessary to install it by screwing the motor onto...

Muffler exhaust opening controller for managing the opening - closing the muffler of the two exhaust valves which has the original stock exhaust.

Terminals straight to the distributor or coils. 2 pieces

Muffler exhaust opening controller for managing the opening - closing the muffler of the two exhaust valves which has the original stock exhaust.

Exhaust valve for the AUDI RS3 TTRS 2500 to be used in place of the original valve. It is necessary to screw on the original motor with the three 8mm bolts and a 13mm wrench, using our dedicated spring to secure the motor to the valve's crescent.

Exhaust opening closing valve to be welded on the exhaust when replacing the original exhaust and creating a sports one and wanting to maintain the original electronic management of the car which allows you to open and close the muffler exhaust, reassembling the original electric motor and keeping the motor standard of the car so as to maintain the usual original management of the...

This complete control unit kit allows you to bypass the management of the muffler valves on the original Ferrari 575 exhaust, activating and deactivating it as you wish from inside the passenger compartment with the simple press of a button on the remote control supplied.

Electric motor to be installed on the exhaust valve when replacing the original valves already present or when purchasing them as a spare part. 2-wire connector

Ferrari 488 kit complete with control unit allows you to by-pass the management of the valves on the Ferrari 488 exhaust by opening and closing the valves as you wish from inside the passenger compartment.

Three-way solenoid valve to be used for managing pneumatic valves on the exhaust of your car or motorbike, pop off valves for turbo diesel, etc. Solenoid complete with filter as shown in the figure, which can also be removed.