Adapter kit that allows you to move, to position the oil filter or to reposition the oil filter laterally when you do not have space to install it for various reasons such as for example on these engines the turbo transformation does not allow a correct construction of the exhaust manifold.

Linear pressure sensor up to 20 bar with 0-5 volt output can be used to measure the pressure of petrol, oil, air and other liquids. 5 volt power supply

Lightened steel engine flywheel Audi S3 and TT 1800 20v Turbo 210 225 hp

Pulley to vary the camshaft timing Suzuki Samurai SJ 1000 8v up to 10 degrees usable for all 1000 F10A 4 cylinder engines and also usable on many other Suzuki 3 cylinder engines.

Questo tubo è dedicato al passaggio olio permette di installare il turbocompressore alto lughezza 42cm

Exhaust manifold flange Audi Volkswagen 1800 20v turbo in steel for all versions of this Audi Seat Volkswagen engine.

DOUBLE STAGE Pop-Off valve with external vent WITH DOUBLE TYPE OF SOUND ! The first possibility is the puff produced by the POPOFF valve itself while the second possibility produces a puff produced by the Turbocharger that can be chosen directly from inside the passenger compartment by simply pressing a switch, when preferred. It can be installed on numerous cars including...

Specific V clamp to be used on IES20 and IES38 turbochargers present in all Audi Volkswagen 2000 Turbo direct injection engines such as Golf 7 i and other similar engines.

Spark plug cables specific for Fiat Ritmo 130 engines. They are high conductivity spark plug cables with 8.8mm thickness of pure silicone, only less than 100 ohms per meter. P>

Completely stainless steel exhaust with double outlet.

Stainless steel threaded cap to screw on the exhaust manifold to close the thermocouple hole when not in use.

Single-mass flywheel in steel with reinforced pressure plate and copper clutch.