• Suzuki Jimny - Vitara 1600 inverted H steel connecting rods, special connecting rods with unique ProtoXide design, with lubrication hole inside bushing like the original Suzuki 1600 8v and 16v connecting rods.
• Inverted H-shaped connecting rods recognizable by the indelible ProtoXide brand and you will find the right tightening torque for the bolts, furthermore we remain at your disposal to answer all your assembly doubts which will allow you to carry out a correct installation free of errors due to a lack of experience .
• If you need connecting rods with different sizes than the standard, on request we can "adapt" our work according to your requests. For this reason there could be price increases precisely for these possible extra changes if requested, to our original technical drawing and different timing.
• Our technical drawing can also be shown and modified only after order confirmation, to receive any written confirmation on the changes to be made (e.g. oversized plug...)
• This type of application has already been tested by some of our customers and can support over 400hp AND THE PHOTO REALLY SHOWS THE CONNECTING RODS DEDICATED FOR THESE SUZUKI APPLICATIONS and can be installed on all piston diameters, oversized or otherwise.

Below are the technical data of our connecting rods:

• Weight: gr. 100 CAD/ONE
• Connecting rod length A : contact us at the office
• Connecting rod head hole diameter B : contact us at the office
• Pin hole diameter C : 19.00mm
• Bolt Type: 3/8 ARP2000