Professional digital camera that allows it to be inserted in the spark plug hole to see the inside of the engine

Pliers for tightening the spark plug cable terminals thus allowing you to self-build and tighten the spark plug cable terminal connectors in complete autonomy, carrying out a workmanlike job.

Very useful complete kit for measuring the compression ratio of a complete engine, with graduated glass burette.

Two-channel oscilloscope with probes specific including use of laptop or desktop computer.

Feeler gauge for measuring and checking spark plug gap electrode distance and allows you to measure the thickness between the ground electrode and the central one and simply adjust it in a second by moving the central electrode closer or further apart.

Pliers for insertion and removal of the bands on the piston.

Tool that allows you to shorten the piston rings of any engine, both forged and traditional pistons, based on the diameter of your cylinder and according to your needs, removing the usual material from both sides of the ring.

Machine verification of the compression of the springs.

Gun that allows you to start any engine without turning the ignition key.

Graduated disc useful for correct timing of both the engine and the cams. Disc diameter you will receive can range from 230mm-260mm (23-26cm) based on availability, suitable to be installed on the flywheel.

Graduated disc useful for correct timing of both the engine and the cams.

Oscilloscope four tracks with case-specific auto repair or automotive enthusiasts, for exclusive use on the computer.