• The fragility of these connecting rods in the event of an increase in horsepower is now known, especially undersized and with a lubrication hole which leads to a thinning of the section of the stem.
• It is easy to see the difference between our application and the original version of the direct injection 1400 turbocharged engine.
• In the package you will find the right tightening torque for the bolts, we are also at your disposal to answer all your assembly doubts which will allow you to carry out a correct installation without errors due to lack of experience.
• In case you need connecting rods with different sizes compared to the standard, on request we can "adapt" our machining according to your requests. For this reason there could be price increases for these extra changes, if required, to our original technical drawing.
• Our technical drawing can also be shown and modified only after the order confirmation, to receive any written confirmations on the modifications to be made (e.g. oversized pin ..)
• This type of application has already been tested by some of our customers and can support up to 400hp
• Set consisting of 4 pieces

Here are the technical data:

• Weight: gr. 486 or 504 CAD/UN original
• Length of connecting rod A : 100.00mm
• Big end hole diameter B : 100.00mm
• Pin hole diameter C : 0.00mm
• Closing torque 4.2 kgm