Turn any electrical component on or off with a 12 volt power supply with the push of a button on your remote. Typically used to open or close exhaust flaps or turn something on/off.
This complete kit allows to by-pass the management of the valves on the original exhaust by activating and deactivating it at will using the engine depression that must already be present on the car.
Enable or disable up to 4 relays from a 12 volt supply with the simple press of one of the 4 buttons on your remote. Normally used to open or close exhaust throttles, change maps, or toggle something on/off, screw terminals
Fully electronic valve that allows you to open and close the muffler exhaust, complete with control unit and remote control and everything you need. It is only necessary to install it by welding it on the drain.
Ferrari 458 complete kit with control unit allows you to bypass the management of the valves on the original exhaust by opening and closing it as you wish from inside the passenger compartment.
Electric exhaust valve controller opening - closing with remote control muffler with the possibility of controlling one or two exhaust valves with two-wire connector.
Ferrari 488 kit complete with control unit allows you to by-pass the management of the valves on the Ferrari 488 exhaust by opening and closing the valves as you wish from inside the passenger compartment.
Exhaust valve AUDI RS3 TTRS 2500 to be used in place of the original valve. It is necessary to screw the original motor with the three 8mm bolts and 13 key using our spring to fix the motor to the crescent of the valve.
This kit allows you to independently decide the turbo pressure at which the command will be sent to the exhaust valve (to be purchased separately) to make it open instantly.
This "Black box in one" contains everything you need to control all the vacuum valves on the exhaust muffler, including: negative pressure air pump to control and manage valves, electronic control unit and signal receiver with double remote control. This version is already complete with internal check valve.
Complete control unit with wiring that opens or closes any 2-wire exhaust muffler valve via a timed pulse that continuously changes polarity automatically with each press of the button on the remote control, to allow the valve already present on the exhaust to open or close. 12 volt power supply that with the simple press of a button on your remote control allows you to open and close the butterfly on the exhaust.
Three-way solenoid valve to be used for managing pneumatic valves on the exhaust of your car or motorbike, pop off valves for turbo diesel, etc. Solenoid complete with filter as shown in the figure, which can also be removed.
Automotive relay holder with hole and fixing bracket complete with all cable lug terminals including small fastoms with interlocking tab for all types of relays, present only in some relays.
This kit allows you to independently decide the pressure of the turbo to which the command will be sent to the valve on the exhaust (to be purchased separately) to make it open instantly.
Online only
Valve for use with depression or pressure command to open the exhaust muffler.
This website uses cookies to ensure you get the best experience on our websiteAbout cookies