Measured round exhaust diameter 38mm full display temocoppio tck and nipple stainless steel

Linear pressure sensor up to 10 bar with 0-5 volt output that can be used to measure the pressure of petrol, oil, air and other liquids. Power supply 5 volts

Card to stabilize the input voltage at 5 volts

Threaded stainless steel bushing to be welded onto the exhaust, already cut at an angle and rounded to make welding onto the exhaust pipe as easy as possible.

Electronic turbo pressure gauge designed to be inserted perfectly in place of the nozzle as seen in the photo.

Card to stabilize the input voltage at 12 volts

The 06/00 APS pressure sensor installed on Fiat Coupe 2000 Turbo 16v or catalysed Lancia Delta 2000 16v has the limit of being able to measure the turbo pressure up to a maximum of 1.5 bar and this sensor replicates the usual sensor with the usual maximum pressure and with our perfectly plug and play sensor.

Stainless steel threaded bush to be welded onto the exhaust manifold for insertion of thermocouple nipple for reading the exhaust gas temperature with EGT.

Makes mounting the 3/8 npt sensor for the water temperature pressure gauge sensor as easy as possible, fixes directly to the radiator hose with two clamps

Pressure sensor prt 06/01 PRT 06/00 Fiat Coupe 16v turbo - Lancia Delta 2000 16v Turbo Evo 2 catalytic APS 06/00, Lancia code 7750716 allows you to measure the turbo pressure up to a maximum of 1.5 bar 250 Kpa

Stainless steel female threaded bush to be welded on the exhaust for lambda probe insertion. Simplified installation as the upper part is turned to facilitate its welding.

pointer turbo pressure gauge with double staining, Italian and fantastic Protoxide central logo scale.