External wastegate from Tial Sport diameter 44mm MVR of latest design made to take up as little space as possible.
Supplied complete with V-band flanges and relative locking clamps together with all the dedicated fittings.
This new type of wastegate also features the novelty of being water-cooled via an internal cooling passage that you can decide whether to connect or not.
Thanks to the included v-band flanges, once the flange has been welded onto the manifold, it can be positioned and rotated even later, based on the space in the engine compartment.
Our Wastegate comes complete in the package with all the spring combinations to be able to calibrate the wastegate to the desired pressure.
We guarantee perfect functioning as we are exclusive distributors for Italy, beware of all imitations also present on Ebay, ours are complete with interchangeable springs, to be able to decide the calibration.
Once purchased, we provide assembly advice along with diagrams for managing pressure, both electronically and manually, both above and below the membrane.
We cannot confirm the color although it is usually anodized blue, as it depends on stock availability
Sensor that allows you to read the exact position of the wastegate, very useful to be connected with competition units, which allows you to manage the supercharging in "cloosed loop" with the external wastegate, or to check if the valve position was really the desired one with dashboards or data acquisition systems.
Wastegate Ferrari F40 Turbo external type valve for turbocharger. It is installed in place of the original Ferrari wastegate which is now in a non-restorable condition and even with the replacement of the membrane the problems will only be postponed for a few months. This wastegate of ours is the definitive solution.
Wastegate Ferrari 288 GTO external type valve for turbocharger. It is installed in place of the original Ferrari wastegate, which is now in an unrecoverable condition and even with the diaphragm replacement the problems will only be delayed for a few months. Our wastegate is the ultimate solution.
External wastegate Tial Sport to be applied directly on the exhaust manifold, very compact, diameter 38mm. We are direct importers for Italy and we guarantee their perfect authenticity.
Wastegate Ferrari 208 GTS and GTB Turbo VERSION WITHOUT INTERCOOLER. external type valve for turbocharger on original exhaust manifold. It is installed in place of the original Ferrari wastegate which is now in a non-restorable condition and even with the replacement of the membrane, the problems will only be postponed. This wastegate of ours has the usual hole diameter but carries a superior flow and is the definitive solution even when looking to replace the broken original membranes which fail again after a few months.
External wastegate Porsche 944 for specific installation complete with exhaust pipe that goes back into the muffler. Compared to other solutions on the market, we use a wastegate of the same size as the original and with greater lift, and not a solution with a reduced hole to cost less at the expense of performance. Furthermore, we provide a complete kit with specific piping that is mounted exactly as it comes as a replacement for the original wastegate.
TialSport 38 MVS External Wastegate Valve Seal Ring Flange. Ring that rests between the valve head and the exhaust inlet flange coming from the exhaust manifold
Stainless steel ring flange that must be welded onto the wastegate exhaust outlet in order to create the muffler that expels the exhaust gases from the 44mm Tial MVR external wastegate.
SPRING KIT for Tial 38mm MVS external wastegate complete with table to have all the settings available up to 1.5 bar, which can then be increased further with the turbo pressure using any overboost system.
MVS vband flange stainless steel outlet ring which must be welded onto the wastegate muffler exhaust outlet pipe, to be able to secure the 38mm Tial MVS external wastegate with its vband clamp.
Silicone hose intense blue, useful for connecting Pop Off, Wastegate and actuators in general or passages of liquids such as water, not suitable for oil.
Competition reinforced clutch kit consisting of a disc with 6 top quality copper plates with super-cushioned flexible coupling battery with thrust bearing, specific reinforced pusher with "pull" type.
External wastegate Tial Sport to be applied directly on the exhaust manifold, very compact, diameter 38mm. We are direct importers for Italy and we guarantee their perfect authenticity.