External wastegate from Tial Sport diameter 44mm MVR of latest design made to take up as little space as possible.
Supplied complete with V-band flanges and relative locking clamps together with all the dedicated fittings.
This new type of wastegate also features the novelty of being water-cooled via an internal cooling passage that you can decide whether to connect or not.
Thanks to the included v-band flanges, once the flange has been welded onto the manifold, it can be positioned and rotated even later, based on the space in the engine compartment.
Our Wastegate comes complete in the package with all the spring combinations to be able to calibrate the wastegate to the desired pressure.
We guarantee perfect functioning as we are exclusive distributors for Italy, beware of all imitations also present on Ebay, ours are complete with interchangeable springs, to be able to decide the calibration.
Once purchased, we provide assembly advice along with diagrams for managing pressure, both electronically and manually, both above and below the membrane.
We cannot confirm the color although it is usually anodized blue, as it depends on stock availability
Wastegate Ferrari 208 GTS and GTB Turbo VERSION WITHOUT INTERCOOLER. external type valve for turbocharger on original exhaust manifold. It is installed in place of the original Ferrari wastegate which is now in a non-restorable condition and even with the replacement of the membrane, the problems will only be postponed. This wastegate of ours has the usual hole diameter but carries a superior flow and is the definitive solution even when looking to replace the broken original membranes which fail again after a few months.
Sensor that allows you to read the exact position of the wastegate, very useful to be connected with competition units, which allows you to manage the supercharging in "cloosed loop" with the external wastegate, or to check if the valve position was really the desired one with dashboards or data acquisition systems.
SPRING KIT for Tial 38mm MVS external wastegate complete with table to have all the settings available up to 1.5 bar, which can then be increased further with the turbo pressure using any overboost system.
External wastegate to be applied directly on the exhaust manifold, diameter 38mm MVS-AR "competition" version, new development, for engines such as WRC that require maximum cooling like this one which combines water cooling with air cooling.
External Wastegate Porsche 924 911 930 964 for specific installation on models including other Porsche 2000-3000-3300 Turbo engines with water and air cooled engines.
Wastegate Ferrari 208 GTS and GTB with intercooler external valve type for turbocharger. It is installed in place of the original Ferrari wastegate that are now in devastated and unrepairable conditions, and even with the replacement of the membrane the problems will only be postponed to a few weeks later. This wastegate of ours is the definitive solution.
Silicone hose intense blue, useful for connecting Pop Off, Wastegate and actuators in general or passages of liquids such as water, not suitable for oil.
External wastegate Tial Sport to be applied directly on the exhaust manifold, very compact, diameter 38mm. We are direct importers for Italy and we guarantee their perfect authenticity.