Stainless steel tube suitable for the passage of any fuel, even special, such as petrol, alcohol, ethanol, e85, petrol of any kind. Length of the kit 6 meters.
Oil pipes already crimped for Fiat Panda 100 Hp oil radiator with internal Teflon oil passage in convolute for Aspirated or Turbo engines with radiator position above the front passenger wheel.
Fuel hose in metal braiding with a length of over 6 metres, is very useful for building or reconstructing delivery and return lines for special fuels. Suitable for use with oil and petrol, special fuels such as alcohol and E85 complete with 4 specific black Ergal fittings.
Rigid hose special fuels petrol and E85 methanol to build or rebuild rigid fuel lines. Also suitable for use with oil and petrol, and perfectly compatible with special fuels such as alcohol and E85 with 4 fittings
Specific oil drain pipe 15-16 mm internally fitted Blue with internal metal containment braid is very flexible and at the same time a very light pipe. Suitable for use specifically on turbocharger oil drain pipes where the pipe must have quality technical specifications and at the same time withstand very high oil temperatures. Extremely light.
Nitrile rubber hose with containment metal braid is very flexible and at the same time a very light hose. Suitable for use with oil and petrol, very light.
Nitrile rubber hose with metal containment braid is very flexible and at the same time a very light hose. Suitable for use with oil and petrol, very light. Hose that can also be used as an oil return hose to the sump from the turbocharger
Nitrile rubber hose with metal containment braid is very flexible and at the same time a very light hose. Suitable for use with oil and petrol, very light.
Stainless steel tube for building or rebuilding rigid fuel lines. Suitable for use with oil and petrol, and perfectly compatible with special fuels such as alcohol and E85 with the relevant 4 fittings
nitrile rubber pipe with wire containment braid is very flexible and at the same time a very light pipe. Suitable for use with oil and gasoline, light.
Sandwich support for installing external oil radiator in Ergal with holes for oil pressure sensors and temperature sensor suitable for installation on Fiat Alfa Lancia engines with JTD engines and many other engines.
External thermostat for engine oil or gearbox oil. Thermostat with robust reinforced spring, with the possibility of purchasing it with the bracket only or complete with fittings.
Kit to install the oil radiator on all T-JET ABARTH engines of the fiat, alfa, lancia group, both Multiair and NON multiair versions, both 8 and 16v. This kit is usually purchased by those who already have a new oil radiator or must be added by purchasing it in the oil radiators section. OIL COOLER and RADIATOR HOSES NOT INCLUDED.
8mm deep blue silicone tube, very useful for connecting Pop Off, Wastegate and actuators in general or liquid passages such as water, not suitable for oil passage.