The kit includes a bottle of 4 kg certified (allows charging at any "gasificio" present in every province of Italy even in your own!) And their mounting brackets.
This kit allows an increase depending on the preparation of the motor that can vary from 30 up to 80 Hp Hp, by means of calibration included in the kit.
The kit is also a dedicated control unit for all engines with pump injector group Audi / Volkswagen / Skoda to generate the surplus of diesel.
With newly built 12 volt relays you can simply use a very fast impulse with a negative or positive command to activate and keep a load of up to 20amp activated and then always turn it off with the usual impulse of a few milliseconds, and so on. To be used in direct current DC.
It is found in multiple uses from control units for competition on cars or on industrial vehicles such as excavators 01170716 and agricultural vehicles and nautical applications.
Fuel pressure regulator, adjustable and directly insertable into the original flute without any modification that allows you to adjust the fuel pressure from 0.5 to 4.8 bar static plus supercharging. It is installed simply by removing the quick clip and putting this regulator nothing else to install.
Oil radiator kit for Fiat 500 Abarth with radiator and pipes for perfect assembly, complete with installation in the front slot of the bumper. Useful to be purchased by those who have a low intake or for those who want to install a centered oil radiator kit with a spectacular front position that is also spectacular to look at.
GTO 410 oversized turbocharger on double bearings that can be installed on Lancia Delta 2000 engines like the original, and becomes "Plug and Play" if you also purchase the dedicated gasket and pipe kit.
Steel fitting very useful to apply when you decide to turbo transform any engine and with this special fitting it is possible to both fix it and weld it on the oil sump, to make the connection to bring the turbocharger oil drain back into the sump./ p>
Single-mass flywheel kit in steel with ferodo clutch (not in copper) and ProtoXide Fiat 500 Abarth reinforced pressure plate and all Fiat Grande Punto, Alfa Romeo Giulietta Alfaromeo Mito engines with Fiat 1400 16v turbo T-Jet engine. Lightweight CNC machined steel flywheel that can be installed on both 5-6 speed manual and MTA automatic gearboxes.
Fiat Punto GT oversized red Protoxide spark plug cables specific to very high conductivity with the highest thickness ever 8.8mm for the best conductivity of the high voltage current to the spark plugs.
lightened steel flywheel kit with reinforced clutch kit Ford Sierra - Escort Cosworth 2.000 16v Turbo with brake disc with special compound with copper braids reinforced pressure plate with pull type.
Single mass steel flywheel kit with dedicated modified FERODO clutch disc (not copper) and reinforced ProtoXide clutch pressure plate Fiat 500 Abarth made by ProtoXide ON NEW PROTOXIDE DESIGN installable on all similar engines such as Fiat Grande Punto, Alfa Romeo Giulietta Alfa Romeo Mito with Fiat 1400 16v turbo T-Jet engine. Lightened flywheel in steel obtained from solid CNC installable on 5 and 6 speed manual gearboxes both manual and Multiair engine versions