The pressure gauge for fans of car modifications, as it is very easy to appreciate pressure peaks even with a small difference that can sometimes mean incorrect operation of the pump, regulator, injectors, etc ..
Hand indicator with Italian scale and fantastic central ProtoXide logo.
Purpose-built full scale at 4 bar, with 3-wire stainless steel precision sensor.
Very precise and of excellent design with two colors selectable by the user, the first amber red and the other ice white.
With this pressure gauge it is not necessary to bring the pressure pipe up into the passenger compartment as a precision sensor is included in the kit, which transforms the pressure into an electrical impulse, for this reason it is enough to bring only a thin electrical cable into the passenger compartment (already included in the package).
The precision sensor that we use for this pressure gauge, included in the package, is of a professional type and can be used for both petrol and oil, of quality beyond the standard and we have chosen it, precisely because it also works on air and all petrol and oil fluids included.
The sensor is a 3-wire torpedo type powered directly by the instrument, therefore not by a wire like the cheap sensors, thisallows to be used both on metal braided hoses and on rubber hoses, simply by cutting the hose and inserting a T fitting. This feature differentiates it from the classic onion sensors, with only one wire, which do not allow to measure the pressure on the tubes that do not transmit current (for example those normally used in rubber)
Peak pressure reached function, i.e. by pressing the button on the front of the instrument with a light touch, the same will move the pointer to the maximum peak recorded.
Another function present is that of "alarm", which allows, again by pressing the button for a long time, to also insert a pressure limit, which above this value, the instrument will start to alarm the driver with a "beep" beyond than to alternate the white-red color to warn that we are going below the set pressure limit.
A beautiful revolving instrument holder is included in the package as a gift, with its felt to make installation as easy as possible.
Adapter that allows you to easily connect a turbo pressure gauge so as to take both depression and pressure directly into the plastic manifold, avoiding drilling the intake manifold for all cars in the PSA Peugeot 207 - 208 - 308 RCZ THP or Mini R56 group R60 with 1600 Turbo engine.
Pressure gauge for measuring the back pressure of the exhaust gas up to 10 bar. Rectangle tool Protoxide 4-digit digital display with red, compact and peak memory.
Specific oil pressure sensor fitting for all Fiat 500 Abarth - T-Jet engines or for many other Fiat engines with 1400 16v, such as the naturally aspirated Fiat Panda 100hp, which allows the installation of the oil pressure gauge sensor and can be installed in less than a few minutes without any modifications to be made.
Fiat Grande Punto EVO Multiair turbo pressure gauge with double color pointer, Italian scale and fantastic central ProtoXide logo with dedicated adapter for this vehicle.
Manometer to measure fuel pressure up to 10 bar with needle. Very useful to install and then remove when adjusting the fuel pressure when installing a new fuel pressure regulator or a new fuel pump.
Adapter that allows you to easily connect a turbo pressure gauge so as to take both vacuum and pressure directly from the plastic manifold, avoiding drilling the intake manifold for all cars of the PSA group Peugeot 207 - 208 - 308 RCZ THP or Mini R56 R60 with 1600 Turbo engine.
Double display turbo pressure gauge, red 52mm round, incredibly useful tool in monitoring the efficiency of the intercooler drop pressure and when we have cars with double turbos which allows you to read two readings simultaneously and show them on a single display, before the intercooler and after the intercooler for example. It is also possible to use it on all other occasions where it is necessary to monitor two pressure points. Measuring range up to 15 bar.