Baby go BLUE military type switch

With this relay you can activate and keep activated a load up to 30amp and then turn it off by removing the impulse to drive any accessory up to 30 amps

Circuit built and programmed according to your needs up to 2 relays.

Activate mapping 1 or mapping 2 directly with a simple push of a button on the remote control. An easy way to avoid having to install visible buttons only for all Unichip ECUs, any model and many other ECUs.

Switch with red LED integrated.

Pull switch, very convenient to activate something.

Inertial safety switch that disconnects the contact in the event of a collision. 2 connection wires.

This control unit allows to set a threshold from 0-5 volts that when exceeding a selected voltage activates a relay such as the prot oxide relay or any other activation

With this module improperly called digital relay, you can simply activate, keep activated or pulse a load up to 100 amps with a pulse from 3 to 28 volts.

Button with extensible spiral wire for normally open activation which can be fixed on the steering wheel for activations of any kind

Normally open red button with fixing ring and two screwed poles.

Ignition switch with double key

With this relay you can invert the 12 volt commands so as to obtain opposite results to the command such as on the exhaust valves

4-position rotary switch with arrow illumination indicating the chosen contact. For multi-contacts or mapping change

Tubo in silicone blu intenso, utilissimo per collegare Pop Off, Wastegate e attuatori in genere o passaggi di liquidi come acqua, non adatto per olio.