Military type switch CHROME color baby go

Pull switch, very convenient to turn anything on or off.

With this relay you can manage stable controls and avoid return currents from magnets or electric motors so as not to spoil the control driver itself or the control unit.

With this relay you can invert the 12 volt commands so as to obtain opposite results to the command such as on the exhaust valves

Activate mapping 1 or mapping 2 directly with a simple push of a button on the remote control. An easy way to avoid having to install visible buttons only for all Unichip ECUs, any model and many other ECUs.

4-position rotary switch with arrow illumination indicating the chosen contact. For multi-contacts or mapping change

Blue illuminated engine start button with dedicated relay box

12 volt timed relay can activate or deactivate any electronic component with a timer that can be set from 0.5 seconds up to 60 hours!

Three-position switch.

Ignition switch with double key

Button with extensible spiral wire for normally open activation which can be fixed on the steering wheel for activations of any kind

Circuit built and programmed according to your needs up to 2 relays.

Pull switch, very convenient to activate something.

With this relay you can simply by using a very fast pulse with negative or positive command, activate and hold a load up to 20amp and then always turn it off with the usual pulse of a few milliseconds, and so on. 814

This control unit allows to set a threshold from 0-5 volts that when exceeding a selected voltage activates a relay such as the prot oxide relay or any other activation

Military type switch with safety protection, transparent red colour.
Suitable for any use, notable aesthetic impact.