Pressure sensor 4 bar output 0-5 volt power supply 5 -12 volt

Increased pressure sensor up to 4 Bar absolute and can be used on any control unit that accepts a 0-5 volt input signal, especially on Turbodiesel engines but also on petrol turbos when you want to avoid the engine failure warning light and at the same time increase the turbo pressure .

Map or commonly called aps (absolute pressure sensor up to 3 bar).

This filter allows to filter the oil and petrol vapors together with all the dirt related to the evaporation of the engine oil to preserve the electric sensors such as the pressure sensors of our gauges.

Map or commonly called aps sensor (absolute pressure sensor up to 3bar).

Adjustable pressure switch from 0.1 to 2 bar, with normally open contacts with rear adjustment screw. It can be used for example to activate a positive to pulse the additional injectors when a certain pressure is reached, or to activate something when a certain pressure is reached and deactivate it when it goes below. Useful for also driving additional injectors

Linear pressure sensor up to 100 bar with 0-5 volt signal output can be used to measure the pressure of petrol, oils, air, nitrous oxide and other liquids. Power supply from 12 to 30 volts.

The pressure sensor installed on 06/01 fiat coupe 16v has the limit of arriving to measure the turbo pressure up to a maximum of 1.5 bar. Our fully plug and play sensor will be able to reach up to 2.2 bar

Differential back pressure sensor for use on many turbocharged diesel and petrol engines.

Pressure sensor made on request for particular applications that accept a 0-5 volt output signal.

Linear pressure sensor up to 100 bar with 0-5 volt signal output can be used to measure the pressure of petrol, oils, air, nitrous oxide and other liquids. 5 volt power supply