

Ferrari 348 - Mondial adjustable fuel pressure regulator 0280160731 0280160715 137960
€199.00
Tax included
Solitamente 24 ore
Ferrari 348 Mondial fuel pressure regulator designed to replace the original, now unobtainable regulator. Furthermore, this regulator has an additional adjustment screw compared to the original, allowing the additional function of adjusting the fuel pressure to the desired pressure, thus covering the various versions.

SECURE ENCRYPTED PAYMENTS

TRACKING NUMBER FOR ALL ORDERS

MON-FRIDAY SUPPORT 10.00-12.30 15.00-17.30
- Fuel pressure regulator for Ferrari 348 electronic injection and Ferrari 348 - Mondial.
- We made the regulator to replace the original one which has now become unobtainable and we made it with the usual fittings with identical pitches and hose connection on the fuel return part.
- This regulator can be installed in place of the original Ferrari reference 137960 or the Bosch spare part code 0280160731 and BOSCH 0280160715. Check your regulator model carefully, because for this car it is also possible to find another type of different fuel pressure regulator installed on this car, even if very few versions have it.
- The other version can also be found in our catalogue under accessories, but the photo clearly shows the difference, which is in the part of the lower fuel return pipe.
- The original regulator can easily deteriorate or this component no longer works correctly and even with a punctured membrane given the age of the car, the petrol passes through the regulator itself and ends up inside the intake manifold also through the vacuum tube with all the problems that this entails.
- This regulator, which is not the original regulator, but in addition to the original regulator, allows you to decide the desired pressure regulation through the movement of the screw covered by the upper nut, so you can precisely adjust the fuel pressure even in the presence of larger pumps or different needs (enrich the carburetion if you prefer) or because some regulators must be adjusted to 3 bar and others must be adjusted with fuel pressure at 3.8 bar, in this way it is possible to choose the correct pressure thanks to the precision of this regulator.
- The regulator is already complete with BARP hose holder with 16 X 1.5 mm 8mm threaded connection complete with vacuum tube developed for racing preparations in competition.
- This engine has two identical regulators, one for each cylinder bank. In our opinion, when this problem occurs, it is advisable to evaluate whether it is necessary to replace the other one as well to prevent future problems.
- Compatible with Ferrari 348 or Ferrari Mondial always with engine, especially installed in almost all versions but it is necessary to pay attention because this regulator is used in the first versions with Motronic 2.7 injections, while in the latest cars produced around 1994 you can find pressure regulators different from this one, which is always possible to purchase in our catalogue but can only be installed on the very latest units produced with regulator.
- In any case, always choose the fuel pressure regulator that is compatible with the code shown on your original regulator in our shop.
- Therefore, for this reason, our advice is always to carefully check which model your regulator is, also using our photos, or better yet, read the original code or Bosch code so you can compare it with our catalogue and be 100% sure of the model you are purchasing.
Name | Value |
---|
Reviews (0)
You might also like
In the same category
- On sale
- Online only
- On sale!