Turbo pressure sensor for Mercedes applications with pressure up to 4 bar absolute.
Absolute sensor commonly called APS or Map sensor for petrol and diesel engines.
4 absolute bars, also works in depression, very difficult to find on the market with this calibration.
Stabilized 5v power supply
Output signal 0-5 volts
Electrical connector with the pins not positioned in line, but 2 pins above and 1 pin below.
Upon request, we provide accurate linearization table for use on control units or post-purchase data acquisition and functionality testing upon dispatch.
Our sensors, unlike all other sensors on the market, are tested one by one before being sold on our sensor calibration bench, to always be sure of receiving a sensor that works 100% as it should.
If you decide to purchase this sensor you must also be able to modify or have the mapping modified as the sensor alone may not be enough. For this reason it is not possible to make a return after having tried it on the car, therefore if you decide later to make a return it will not be possible to return it, as our packaging must be intact in our usual packaging, never installed, never used and never opened.
Increased pressure sensor for Smart capable of reading up to 2.1 bar, usable on almost all turbo petrol and turbo diesel engines and allows the engine warning light to not come on if appropriately remapped.
Turbo pressure sensor with working range up to 2 bar turbo and 3 bar absolute for 1800 -2000 20v 16v TFSI TSI engines and in any case all cars of the Volkswagen Audi Skoda group 4-wire connector.
Linear pressure sensor up to 110 bar with 0-5 volt signal output which can be used to measure the pressure of petrol, oils, air, nitrous oxide and other liquids. Very convenient power supply as it is possible to connect it to a power supply between 5 and 16 volts.
Adapter that allows you to easily connect a turbo pressure gauge so as to take both depression and pressure directly into the plastic manifold, avoiding drilling the intake manifold for all cars in the PSA Peugeot 207 - 208 - 308 RCZ THP or Mini R56 group R60 with 1600 Turbo engine.
Pressure sensor up to 5.3 bar usable to measure the pressure of petrol, oil, air pressure and other liquids with linear output 0-5 volts. Broadband power supply 5 - 15 volts
Pressure sensor up to 10 bar usable to measure the pressure of petrol, oil, air pressure and other linear outlet liquids. 12 volt power supply, 0-5 volt signal output
Linear pressure sensor up to 6.6 bar with 0-5 volt output that can be used to measure the pressure of petrol, oil, air and other liquids. 5 volt power supply
Pressure sensor up to 5.5 bar usable to measure the pressure of petrol, oil, air pressure and other liquids with linear output 0-5 volts. 5 volt power supply
Increased pressure sensors for Fiat Alfa Romeo Lancia T-jet Abarth 1.400 engines that allow you to measure higher pressures up to 2.1 bar ideal for all vehicles that require an increase in power and have first series sensors that reach a maximum of 1.55 -1.6 bar. Complete set of two turbo pressure sensors