Adapter that allows you to easily connect a turbo pressure gauge so as to take both depression and pressure directly into the plastic manifold, avoiding drilling the intake manifold for all cars in the PSA Peugeot 207 - 208 - 308 RCZ THP or Mini R56 group R60 with 1600 Turbo engine.
Linear pressure sensor up to 10 bar with 0-5 volt output that can be used to measure the pressure of petrol, oil, air and other liquids. Power supply 5 volts
Increased pressure sensor up to 3.5 Bar absolute and can be used on any control unit that accepts a 0-5 volt input signal, especially on Turbodiesel engines but also on petrol turbos when you want to avoid the engine failure warning light and at the same time increase the turbo pressure .
Turbo pressure sensor with working range up to 3 bar turbo and 4 bar absolute for TFSI TSI 2.0 and 2.5 5-cylinder engines and in any case all cars of the Volkswagen Audi group 4-wire connector.
The 06/00 APS pressure sensor installed on Fiat Coupe 2000 Turbo 16v or catalysed Lancia Delta 2000 16v has the limit of being able to measure the turbo pressure up to a maximum of 1.5 bar and this sensor replicates the usual sensor with the usual maximum pressure and with our perfectly plug and play sensor.
Increased pressure sensors for Renault Magane 2 RS 2000 16v engines which allow you to measure pressures up to 2.1 bar instead of 1.4 bar like the originals
Linear pressure sensor up to 110 bar with 0-5 volt signal output which can be used to measure the pressure of petrol, oils, air, nitrous oxide and other liquids. Very convenient power supply as it is possible to connect it to a power supply between 5 and 16 volts.
Turbo pressure sensor with working range up to 2 bar turbo and 3 bar absolute for 1800 -2000 20v 16v TFSI TSI engines and in any case all cars of the Volkswagen Audi Skoda group 4-wire connector.
Adapter that allows you to easily connect a turbo pressure gauge so as to take both vacuum and pressure directly from the plastic manifold, avoiding drilling the intake manifold for all cars of the PSA group Peugeot 207 - 208 - 308 RCZ THP or Mini R56 R60 with 1600 Turbo engine.
Increased pressure sensor up to 4 Bar absolute and can be used on any control unit that accepts a 0-5 volt input signal, especially on Turbodiesel engines but also on petrol turbos when you want to avoid the engine failure warning light and at the same time increase the turbo pressure . 3 WIRE connection