Linear pressure sensor up to 10 bar with 0-5 volt output that can be used to measure the pressure of gasoline, oil, air and other liquids. 5 volt power supply
The 06/00 APS pressure sensor installed on Fiat Coupe 2000 Turbo 16v or catalysed Lancia Delta 2000 16v has the limit of being able to measure the turbo pressure up to a maximum of 1.5 bar and this sensor replicates the usual sensor with the usual maximum pressure and with our perfectly plug and play sensor.
Linear pressure sensor up to 20 bar with 0-5 volt output can be used to measure the pressure of petrol, oil, air and other liquids. 5 volt power supply
1/8 thread vacuum pressure switch for depression and vacuum with normally closed contacts with rear adjustment screw. It can be used for example to deactivate a command when a certain depression is reached maximum -1 bar, or using an inverted relay it is possible to activate something when a certain depression is reached and deactivate it when it goes below.
Linear pressure sensor up to 10 bar with 0-5 volt output that can be used to measure the pressure of petrol, oil, air and other liquids. Power supply 5 volts
This filter allows to filter the oil and petrol vapors together with all the dirt related to the evaporation of the engine oil to preserve the electric sensors such as the pressure sensors of our gauges.
Pressure sensor usable on almost all turbodiesels of the Alfa Fiat Lancia group and allows the engine light not to come on if remapped correctly and allows you to read turbo pressures up to 3 BAR and absolute pressures of 4 BAR
Pressure sensor up to 5.5 bar usable to measure the pressure of petrol, oil, air pressure and other liquids with linear output 0-5 volts. 5 volt power supply
Increased pressure sensor for Smart capable of reading up to 2.1 bar, usable on almost all turbo petrol and turbo diesel engines and allows the engine warning light to not come on if appropriately remapped.
APS 02 -03 ProtoXide turbo pressure sensor that replaces the Marelli 02/03 pressure sensor installed on Lancia Delta 2000 Integrale and Evoluzione, Ford Cosworth 2000 and many other engines.
The FERMO APS module allows you to deceive the original control unit by hiding the real maximum TURBO pressure or any pressure peaks, which form in the intake duct and which consequently generate the annoying power cut and consequent warning light with engine failure due to exceeded overpressure, so with this module it is possible to avoid this.
Pressure sensor up to 4.1 bar usable to measure the pressure of petrol, oil, air pressure and other liquids with linear output 0-5 volts. Power supply 5 - 12 volts